Recent Posts

What a Gas Meter Cannot Tell Us?

Main summary

Georgia has enabled consumption-based differentiation of household gas tariffs, but cubic metres alone cannot describe a family’s financial capacity. BTU connects dwelling size, heated space, heating duration and fuel use to show why tariff assessment needs household circumstances as well as prices.

Main conclusions

  • The law dated 28 October 2026 authorises Georgia’s regulator to differentiate household natural-gas tariffs by consumption until 1 January 2038. It does not itself establish new prices or consumption bands.
  • BTU’s calculation from Geostat’s published 2022 survey distributions produces a lower overlap bound of approximately 39% of rural households for living in a large dwelling while heating no more than 50 m². This is a lower bound calculated from historical survey estimates.
  • Rural households in that survey reported longer heating seasons and less window insulation, yet lower average annual gas consumption than urban households. BTU recommends combining meter records with household, housing and other-fuel information when assessing the targeting of support.

A new legal option, a familiar economic problem

Tariff debates often begin with a simple proposition: people who consume more should pay more. With a constant unit price, their total bill normally already does. Differentiated pricing asks a different question: should the price of each cubic metre change when consumption crosses a threshold? That introduces a distributional question. Does higher use necessarily indicate greater means, or can it also reflect a larger family, a longer winter or a home that loses heat?

Georgia’s amendment to the Law on Energy and Water Supply, dated 28 October 2026, gives the regulator this additional option. Its authority to differentiate household natural-gas tariffs by consumption extends until 1 January 2038. The corresponding transitional water provisions extend until 1 January 2036. The law provides for entry into force upon publication. It creates a legal framework, not a numerical gas-price schedule. Assessing an actual price change requires the regulator’s relevant decision, including rates, thresholds and billing rules.

The sensible starting point is therefore neither automatic endorsement nor automatic rejection. It is understanding what consumption measures. BTU’s central finding is that lower consumption and better household conditions are different outcomes. Savings may result from a more efficient appliance, but also from heating fewer rooms. An assessment should be capable of distinguishing those paths.

BTU examined connected tables in Geostat’s 2022 household energy survey. They provide a historical baseline; the energy-consumption reference period is 1 May 2021 to 1 May 2022. They are not substituted for 2026 conditions. Their value lies in describing housing, household composition, heating and fuels within the same study. These relationships identify questions that a current tariff assessment should not omit.

A large dwelling is not the same as ample comfort

Geostat reported that 63.4% of rural households occupied a dwelling of at least 101 m². Read alone, that figure might suggest extensive living space. The heating table provides another perspective: 7.0% heated up to 15 m², 39.8% heated 16–30 m² and 28.5% heated 31–50 m². Together, 75.3% heated no more than 50 m².

The tables do not identify which individual households appear in both groups. They nevertheless permit a cautious lower bound. Only 36.6% of rural households were outside the large-dwelling group. Even if all of them belonged to the 75.3% heating no more than 50 m², 38.7 percentage points would remain in the large-dwelling group, within the published distributions.

The resulting minimum overlap is approximately 39%: a dwelling of at least 101 m² combined with no more than 50 m² of heated space. The source figures are rounded, so the decimal should not imply greater certainty than the survey supplies. This is not an estimate obtained by multiplying two percentages or assuming that housing size and heating are independent. It is the smallest overlap consistent with the published marginal estimates.

Its substantive value is separating floor area from heated space. A large dwelling does not tell us how much thermal comfort a family enjoys. Conversely, partial heating does not automatically establish poverty: unused rooms, household routines and other circumstances may explain it. Eligibility for assistance therefore needs additional evidence rather than a single dwelling-size or consumption threshold.

Indicator, Geostat 2022 survey Urban Rural
Dwelling of at least 101 m², % of households 22.2 63.4
Heated space up to 50 m², % of households; BTU sum 65.2 75.3
Heating period of 6–7 months, % of households; BTU sum 45.3 78.5
Insulated external windows, % of households 55.3 38.6
Five or more household members, % of households 23.6 33.2

 

Source: Geostat, Energy Consumption in Households, tables 3.6–3.8, 3.10 and 3.13. Sums calculated by BTU. Each column uses households in its respective settlement type as the denominator.

Longer heating, less gas

Heating duration differed substantially. In rural areas, 38.5% of households reported six months of heating and 40.0% reported seven. BTU’s combined share is 78.5%, compared with 45.3% in urban areas: a 33.2-percentage-point difference. This does not isolate the effect of climate, but shows that equal annual consumption need not represent equal periods of heating.

Heat retention also differed. Insulated external windows were reported for 55.3% of urban households and 38.6% of rural households, a 16.7-point gap. External-wall insulation was uncommon in both groups, at 4.8% and 4.7% respectively. Window insulation is not a complete measure of building performance. It does, however, identify why reducing consumption cannot be treated solely as a matter of personal willingness.

Household size adds another dimension. The rural share of households with at least five members exceeded the urban share by 9.6 percentage points. Heating needs do not rise in direct proportion to headcount: several people can share a room. Yet hot water and cooking also require energy. A threshold applied to a single customer account does not automatically capture those needs.

Against that background, average fuel consumption is particularly instructive. Annual natural-gas use averaged 1,345.0 m³ per urban household and 884.7 m³ per rural household, a difference of 460.3 m³. Rural households’ longer reported heating seasons did not translate into higher average gas use.

Annual average per household, 1 May 2021–1 May 2022 Urban Rural
Natural gas, m³ 1,345.0 884.7
Electricity, kWh 2,002.7 1,623.9
Firewood, m³ 0.4 3.1

 

Source: Geostat, same survey, table 4.2. Averages cover households in each settlement type, not only users of the particular fuel. Different physical energy units are not added together.

Average rural firewood use exceeded the urban figure by 2.7 m³. This does not establish how much gas a particular household replaced with wood. Such a calculation would require linked household records and appropriate fuel characteristics. It does explain why one gas bill cannot represent either total energy expenditure or total heat obtained. A family may use several fuels while only one appears on that bill.

What a well-designed policy needs to distinguish

Consumption-based differentiation has a rationale. It can encourage conservation and preserve a lower unit price for basic use. To evaluate whether it achieves that purpose, three questions must be separated: how much energy a household needs, how effectively it converts that energy into comfort, and what it can afford to pay.

Conflating them creates two risks. A higher-use household might enter a more expensive band because of family size or building conditions rather than abundant disposable income. Low use might indicate efficiency, but could also reflect limited heated space. These are mechanisms to test with current evidence, not claims that the historical tables establish their present prevalence.

BTU therefore recommends assessing a new schedule with consumption records and household circumstances together. Relevant information includes seasonal use, household size, suitable income or social-need indicators, and heating conditions. Linking information requires a lawful basis, data minimisation and protection of personal information.

Current assistance and efficiency improvements perform different functions. A temporary concession reduces the bill payable now. Better insulation may reduce the energy needed to maintain the same comfort. But the investment’s benefits must be assessed separately using building condition, installation costs, actual heat losses and heating practices. A universal savings promise would not be justified.

Billing design matters as well. When bands are proposed, consumers need to know whether a higher unit price applies only above a threshold or to the entire volume, how the reading period is handled, and how assistance is credited. These are consequential design choices. The October law does not provide their numerical answers.

Household decisions and trust

BTU’s analytical examination of its Georgian consumer research materials adds a complementary perspective: a recurring commitment is more than a quoted price. Families need to understand the obligation in advance, relate it to their budget, and obtain a useful explanation of disputed charges. The article uses the materials’ household-budget and service-clarity frameworks, without importing behavioral percentages from them.

Communication should consequently compare old and new rules using the same actual consumption. The final bill, reading-period length and any concession should be shown separately. A consumer should not need to assemble a personal answer from fragments scattered across several pages.

This recommendation is testable. With appropriate consent, users selected to cover different household sizes and housing circumstances could receive two explanations of the same tariff. If the purpose is to assess clarity alone, the price and other terms must remain unchanged. Direct feedback measures understanding and perceived trust; payment and consumption outcomes are complementary measures, not substitutes for those responses. Such a study would also document participant selection and timing rather than presenting a convenient group as automatically representative.

Conclusion

Georgia’s legal change supplies another instrument for tariff policy. Its quality will depend on how well conservation incentives are aligned with household circumstances. BTU’s connected comparisons show why dwelling size, heated space, heating duration and fuel choice can mislead when read separately. A meter measures consumption accurately; a sound decision also needs to understand what lies behind it.

Questions and answers

Did the October law itself raise gas prices? It sets no specific price. It authorises consumption-based differentiation; any actual change requires assessment of the relevant regulatory decision.

Is approximately 39% an energy-poverty rate? It is a lower overlap bound calculated from the 2022 survey’s published distributions for large dwellings and limited heated space. Need for support requires further information.

Why use a historical survey? It connects housing, heating and fuel characteristics within one study and identifies questions for assessment. Current support decisions require updated evidence.

What would count as improvement? Lower consumption alone is insufficient. Bill burdens, heating conditions and energy needed for comparable comfort also matter.

Recent Posts